Parts / TPU sleeve coupler (secondary concept)
Drag to orbit · pinch / scroll to zoom · two fingers / right-drag to pan. Shown as exported for printing, on a 10 mm grid.
TPU sleeve coupler (secondary concept) secondary
Slide-on slotted sleeve on the rod with a TPU friction liner.
- File
hardware/stl/coupler_tpu_sleeve.stl- Bounding box
- 10.50 × 10.50 × 24.00 mm (X × Y × Z, as exported; Z up from the bed)
- Volume
- 1.32 cm³; ≈ 1.7 g if printed solid in PETG (real mass depends on walls and infill)
- Mesh
- 600 triangles
- Material
- PETG
- Layer
- 0.16 mm
- Walls / infill
- 4 walls, 40 %
- Orientation
- Upright.
- Supports / brim
- None. 3 mm brim.
- Quantity
- -
- Versions
- ABCD
Print settings are starting points from ASSEMBLY.md and the print plan, not values tested on this design. Dimensions that depend on the knob, rod or clip are estimated from photo, not caliper.
← Collet coupler (secondary concept)TPU sleeve liner (secondary concept) →