Parts / Tail hook (obsolete)
Drag to orbit · pinch / scroll to zoom · two fingers / right-drag to pan. Shown as exported for printing, on a 10 mm grid.
Tail hook (obsolete) obsolete
Docked on a white hook below the knob. The photos show no such hook, so it is kept for reference only.
- File
hardware/stl/anti_rotation_arm_tail_hook.stl- Bounding box
- 13.40 × 74.51 × 8.00 mm (X × Y × Z, as exported; Z up from the bed)
- Volume
- 1.62 cm³; ≈ 2.1 g if printed solid in PETG (real mass depends on walls and infill)
- Mesh
- 148 triangles
- Material
- PETG
- Layer
- 0.2 mm
- Walls / infill
- 100 %
- Orientation
- Flat as exported.
- Supports / brim
- None.
- Quantity
- -
- Versions
- ABCD
Print settings are starting points from ASSEMBLY.md and the print plan, not values tested on this design. Dimensions that depend on the knob, rod or clip are estimated from photo, not caliper.
← Face tab (last resort)Collet coupler (secondary concept) →