Parts / Face tab (last resort)
Drag to orbit · pinch / scroll to zoom · two fingers / right-drag to pan. Shown as exported for printing, on a 10 mm grid.
Face tab (last resort) last resort
Adhesive (VHB) reaction pad. Conflicts with the no-glue rule and needs the tail socket, which the round-5 housing no longer has. Only if the clip rail fails.
- File
hardware/stl/anti_rotation_arm_face_tab.stl- Bounding box
- 18.00 × 28.50 × 3.00 mm (X × Y × Z, as exported; Z up from the bed)
- Volume
- 0.67 cm³; ≈ 0.8 g if printed solid in PETG (real mass depends on walls and infill)
- Mesh
- 384 triangles
- Material
- PETG
- Layer
- 0.2 mm
- Walls / infill
- 3 walls, 100 %
- Orientation
- Flat as exported (pad on the bed).
- Supports / brim
- None.
- Quantity
- -
- Versions
- ABCD
Print settings are starting points from ASSEMBLY.md and the print plan, not values tested on this design. Dimensions that depend on the knob, rod or clip are estimated from photo, not caliper.