Parts / Offset gear drive: cover lid
Drag to orbit · pinch / scroll to zoom · two fingers / right-drag to pan. Shown as exported for printing, on a 10 mm grid.
Offset gear drive: cover lid fallback
Top wall + spigot of the split cover. Not yet re-checked by the print plan.
- File
hardware/stl/offset_gear_cover_lid.stl- Bounding box
- 46.40 × 30.40 × 2.20 mm (X × Y × Z, as exported; Z up from the bed)
- Volume
- 1.03 cm³; ≈ 1.3 g if printed solid in PETG (real mass depends on walls and infill)
- Mesh
- 6,676 triangles
- Material
- PETG
- Layer
- 0.2 mm
- Walls / infill
- 3 walls
- Orientation
- As exported (top down).
- Supports / brim
- None expected.
- Quantity
- -
- Versions
- ABCD
Print settings are starting points from ASSEMBLY.md and the print plan, not values tested on this design. Dimensions that depend on the knob, rod or clip are estimated from photo, not caliper.